黄土滑坡临滑预报的应变控制方法   总被引：4，自引：0，他引：4  

李保雄 《中国地质灾害与防治学报》2003,14(2):28-30

我国西北部地区黄土沉积巨厚，地质构造复杂，土体强度低，水敏感性强，各种类型的黄土滑坡广泛分布。黄土滑坡具有滑动规模大、滑动速度快、灾害损失严重等特点。黄土滑坡滑动时间预报，特别是临滑预报在地质灾害防治领域具重要意义。根据黄土力学性质试验与典型黄土滑坡变形分析研究结果，在对比分析黄土剪切应变特性与滑坡滑动破坏机制的基础上，论文提出了一种黄土滑坡临滑预报的应变控制方法。建立了中、浅层与厚层黄土滑坡的应变破坏标准。经多处滑坡实例验证，结果基本合理，可应用于黄土滑坡临滑预报。  相似文献   

山东蒙阴县埠洼金矿与韧性剪切带的关系   总被引：1，自引：0，他引：1       下载免费PDF全文

肖丙建  夏立献  刘巨龙  李宪栋 《地质找矿论丛》2003,18(3):195-198

埠洼金矿受NW向台上-盘东沟韧性剪切带的控制，矿体产于剪切带中南部的英云质超糜岩中，矿体呈右行侧列式分布，成矿体用与韧性剪切变形变质导致的动力分异作用密切相关，赋矿空间为韧-脆性剪切作用形成的扩容带，是在韧性剪切基础上形成的金矿床。  相似文献   

陕川丁家林-太阳坪含金脆-韧性剪切带特征     

张秀琴  邓建华  董刚  陈勇敢  周遗军 《黄金地质》2003,9(2):15-21

丁家林-太阳坪脆-韧性剪切带处于扬子地台、秦岭及松潘-甘孜褶皱带的结合部,出露长度大于10 km,走向40～50°,以密集的褶曲带、劈理带、石英脉带单独或组合出现为标志.主要经历了2期变形,第1期脆-韧性剪切变形分2个阶段.S1阶段茂县群地体发生低级变质并形成千枚理S1,分异石英脉q1;S2阶段分异q2并发生金矿化,形成S2.第2期韧-脆性剪切变形发育韧-脆性断层S3,分异q3,并发育擦痕和阶步及强烈金矿化.晚期韧-脆性剪切作用叠加在早期脆-韧性剪切变形之上.丁家林-太阳坪金矿带的2期内生成矿作用与变形作用同步进行,其控、容矿构造为脆-韧性剪切变形组构.  相似文献   

艾肯能塔格韧性剪切带     

朱志新  杨长文  李卫东  冯新昌 《新疆地质》2003,21(3):286-289

艾肯能塔格韧性剪切带位于东天山干沟至却勒塔格一带的古元古界兴地塔格岩群中，构造上属于中天山隆起带并受控于阿其克库都克大断裂．岩性主要为一套花岗质糜棱岩、糜棱岩化火山岩、糜棱岩化碳酸岩等．岩石变形较强，韧性剪切宏观构造明显，显微变形发育．存在两期变形特征，变形时代为中下奥陶世洋盆闭合时，剪切位移量为8km左右．  相似文献   

新型组合连梁控制结构体系   总被引：9，自引：0，他引：9  

邓志恒  潘峰  陶晓光  唐光暹 《世界地震工程》2003,19(3):6-11

分析了连梁在水平力作用下的破坏机制，对连梁结构体系的发展及结构抗震控制进行了评述，在此基础上提出一种新型组合连梁控制结构体系，并对其进行了概念分析，提出了有待研究的若干关键问题。  相似文献   

博格达山晚石炭纪造山活动的变形地质记录   总被引：13，自引：2，他引：13  

王宗秀  李涛  周高志  卢苗安  柳永清  李寅 《地学前缘》2003,10(1):63-69

主要由钙碱性火山岩、火山碎屑岩组成的博格达古岛弧是天山缝合造山带的重要组成部分 ,是一个发育较成熟的山链 ,其演化经历了晚古生代的韧性剪切收缩 ;中生代伸展调整及新生代再造山过程。晚古生代的造山活动在博格达山有很好的地质记录 ,并以显著的韧性剪切变形带的形成和发育同造山的褶皱构造为特点。剪切变形带内同构造的石英脉中的锆石U PbSHRIMP测年结果与山链中花岗岩、辉长岩年龄颇为一致 (311～ 316Ma) ,这个年龄反映在结束洋盆散聚、碰撞焊接的晚华力西期造山过程中 ,博格达古岛弧内存在一次虽不甚强烈 ,但又较为明显的构造岩浆事件 ,其成因可能与引起石炭纪大规模裂陆式喷发的深部断裂构造重新活动有关。  相似文献   

河南省文峪金矿床构造控矿规律研究   总被引：6，自引：2，他引：6       下载免费PDF全文

徐叶兵  范永香 《地质与勘探》2003,39(5):30-34

峪金矿床是小秦岭金矿带内一大型金矿床，属韧—脆性叠加剪切带石英脉型金矿，构造是其首要控矿因素。早期韧性剪切带只对矿脉起宏观控制作用。晚期的脆性断裂为含金石英脉的直接控矿构造。成矿期脆性断裂的多次继承性活动分别控制了热液期4个成矿阶段。脆性断裂形成的空间形态对矿体形态产状具控制作用。有利的矿化富集部位为：①显示压扭性质的近东西向断裂沿走向产状变化处，沿倾向由陡变缓处，断裂面的凹凸转变处；②断裂分支复合部位；③成矿期断裂多次脉动的启张部位；④成矿期断裂构造继承性活动强的部位等。在构造控矿研究的基础上，结合前人部分研究成果。构建了该矿床构造控矿模式。  相似文献   

Estimation of fundamental periods of shear‐wall dominant building structures     

Can Balkaya  Erol Kalkan 《地震工程与结构动力学》2003,32(7):985-998

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

韧性剪切带的变形变质与同构造熔融作用——以中祁连地块宝库河韧性走滑剪切带为例   总被引：5，自引：0，他引：5  

戚学祥  李海兵  张建新  蔡金郎 《地质论评》2003,49(4):413-421

宝库河韧性剪切带是发育在中祁连地块北缘上的一条向北陡倾,走向近东西,宽约6 km的右行平移型韧性剪切带.剪切带内岩石原岩为泥质岩、基性岩和花岗岩,变质程度达角闪岩相,变形变质温度在685～763±46℃之间,压力在0.62～0.83±0.13 GPa范围内.其内长英质条带非常发育,规模变化较大,分布局部相对集中且受剪切带控制,走向与剪切带一致,平行于叶理,孤立无根,并在后期递进变形过程中发生不同程度的糜棱岩化、布丁化和褶皱,主要成分为长石和石英,明显不同于韧性剪切前或后侵入的花岗岩脉或岩体.长英质条带特征、REE配分模式及剪切带内岩石的变形变质温度说明剪切带内发育的长英质条带与基体是同源的,是在剪切应变过程中剪切热使围岩内部分物质发生动态熔融形成的,是同构造熔融作用的产物.  相似文献   

Simulation and measurement of surface shear stress over isolated and closely spaced transverse dunes in a wind tunnel     

Ian J. Walker  William G. Nickling 《地球表面变化过程与地形》2003,28(10):1111-1124

Topographic interactions generate multidirectional and unsteady air?ow that limits the application of velocity pro?le approaches for estimating sediment transport over dunes. Results are presented from a series of wind tunnel simulations using Irwin‐type surface‐mounted pressure sensors to measure shear stress variability directly at the surface over both isolated and closely spaced sharp‐crested model dunes. Findings complement existing theories on secondary air?ow effects on stoss transport dynamics and provide new information on the in?uence of lee‐side air?ow patterns on dune morphodynamics. For all speeds investigated, turbulent unsteadiness at the dune toe indicates a greater, more variable surface shear, despite a signi?cant drop in time‐averaged measurements of streamwise shear stress at this location. This effect is believed suf?cient to inhibit sediment deposition at the toe and may be responsible for documented intermittency in sand transport in the toe region. On the stoss slope, streamline compression and ?ow acceleration cause an increase in ?ow steadiness and shear stress to a maximum at the crest that is double that at the toe of the isolated dune and 60–70 per cent greater than at ?ow reattachment on the lower stoss of closely spaced dunes. Streamwise ?ow accelerations, rather than turbulence, have greater in?uence on stress generation on the stoss and this effect increases with stoss slope distance and with incident wind speed. Reversed ?ow within the separation cell generates signi?cant surface shear (30–40 per cent of maximum values) for both spacings. This supports ?eld studies that suggest reversed ?ow is competent enough to return sediment to the dune directly or in a de?ected direction. High variability in shear at reattachment indicates impact of a turbulent shear layer that, despite low values of time‐averaged streamwise stress in this region, would inhibit sediment accumulation. Downwind of reattachment, shear stress and ?ow steadiness increase within 6 h (h = dune height) of reattachment and approach upwind values by 25 h. A distance of at least 30 h is suggested for full boundary layer recovery, which is comparable to ?uvial estimates. The Irwin sensor used in this study provides a reliable means to measure skin friction force responsible for sand transport and its robust, simple, and cost‐effective design shows promise for validating these ?ndings in natural dune settings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献